Aluprof S.A.




MB-60 is a modern aluminium system intended for realizations of exterior architectural building elements requiring thermal and acoustic insulation, such as: various types of windows, doors, vestibules, display windows or spatial structures.

The system profiles have a three-chamber structure. The structural depth of the window sections is equal to 60 mm (frames) and 69 mm (casements), and for doors 60 mm and 60 mm, respectively. Such assumed depths of casement and frame sections give the effect of one surface from the exterior side after closing - in the case of the window, and the facing effect to the surfaces of casement and the frames - in the case of doors. Shape of the profiles allows achieving slender and resistant window and door structures.

There exists a possibility to bend profiles, such as frames, casements and lacings what allows achieving various types of arches and arch structures.

The MB-60 system is characterised by a low value of the overall heat-transfer coefficient U, thanks to application of the thermal breaks and gaskets. This system profiles meet the thermal requirements for the material group 2.1 in the case of windows, and 2.2 in the case of doors according to DIN 4108. In the systems, there are profiled "omega"-shaped thermal breaks applied of the width equal to 24 mm (windows) and 14 mm (doors) made from polyamide reinforced with fibreglass. Shape of the breaks increases the rigidity of profiles as compared to flat breaks, and also facilitates section drainage, ensuring the appropriate thermal insulation in all atmospheric conditions at the same time. The threshold made of HPVC and the EPDM gaskets guarantee good thermal insulation of the door leaves as well as air and water tightness.

The characteristic feature of this system is its close relation to the window/door MB-45, MB-59S and MB-70 systems. Adapting such a constructional design allowed achieving and applying many compatible elements in these systems, e.g. common glazing beads, corner joints, sealing strips, glazing and closing gaskets, common hardware, closing devices, hinges, and many identical technological processes such as pinning of connecting elements of lacings and crossbars, gluing corners joints, cutting out various recesses, etc. One of the effects of this standardization is that both the external and the internal appearance of the products such as windows, doors, etc. produced with various exterior and interior building systems are almost identical.

The MB-60 system serves as a base for solutions with an improved thermal insulation: MB-60HI, MB-60US HI, MB-60E HI, MB-60EF HI.

Window and door systems - General information

ALUPROF aluminium systems allow to fabricate many different types of windows and doors, depending on the scope and specific requirements for functionality, aesthetics, thermal insulation, burglary resistance, smoke control or fire resistance. These include both structures with no thermal insulation designed to fabricate internal partition walls and door (MB-45, MB-45 Office, MB-EXPO) or balcony developments (MB-23P system ), and solutions based on thermally insulated profiles (MB-60, MB-70, MB-59S). A significant part of thermally insulated systems is available in “HI” variant, and is characterized by special inserts into the profiles that lower the thermal conductivity coefficient.

The best thermally insulated structure offered by ALUPROF is the MB-104 PASSIVE system, which uses innovative materials and technical solutions. It’s one of the major ALUPROF product that perfectly meets the objectives of energy-efficient and passive buildings.

The MB series includes not only structures with the most common types of opening: side/bottom, but also lifting sliding patio doors MB-77HS, sliding windows & doors MB-Slide / MB-Slide ST, pivot windows“Pivot”, outward openable windows (e.g. MB-59S Casement) or windows dedicated to specific façade solutions, such as MB-60EF. We also offer “Industrial” type windows, dedicated to the revitalized historic buildings.
Numerous MB series systems allow for the fabrication of accordion doors, burglary resistant constructions, and smoke exhaust windows. For buyers who want to reconcile the right technical parameters with an affordable price, we offer a whole range of economic solutions, such as MB-45S, MB-59SE, and MB-60E.
Our window & door systems offering includes special, fire- and smoke-resisting partition walling: MB-78EI with the fire resistance class of EI15—EI90 and the MB-118EI with the fire resistance class of EI120. This group of products is completed by smoke-resisting doors with no fire resistance: MB-45D.
ALUPROF’s wide range of solutions is systematically developed in order to best meet the needs of contemporary architecture and meet the requirements of increasingly stringent standards and regulations.


Full range